Hit the sweet spot between ease of installation and high performance with the RHP 401 series Hose. Engineered for use with our 2000 series hose ends, RHP 401 series Hose delivers great performance and can be assembled in seconds.
RHP 401 series hoses contain a Viton inner tube, a braided layer of tough nylon mesh and a smooth outer cover. For best results, assemble with our 420 Series Push Lock Hose Clamps and 5420-1 push lock hose clamp pliers
Compatible with these major fluids:
- Pump and Race Gas (leaded and unleaded)
- E85
- Methanol
- Diesel & BioFuels
- Oil
- Transmission Fluid
- Coolant
- Power Steering Fluid ONLY on the return side - customer to verify pressures do not exceed hose pressure ratings
*This hose is not designed for use on High Pressure Power Steering lines and is not to be used for High Pressure Hydraulic applications
**Reference page 31 of Vol 9.0 catalog for more information like O.D./I.D. measurements, working/burst pressure ratings, Vacuum ratings, weight per foot, temp ratings, and more
Note: Our 401/402 Series hose is rated for temperatures up to 212F (100C). If you are thinking of running the hose near a heat source we recommend applying some of our 244 Series fire sleeve over the line. Our 244 Series heat sleeve is good to withstand continuous working temperatures up to 500°F.
Available in precut 3', 6', 10', 15', 20' and 50' lengths
NHRA accepted
link- http://promod.nhra.com/userfiles/file/NHRAAcceptedProducts.pdf
